esp-arduino-libs · lyusupov · Oct 10, 2025
diff --git a/README.md b/README.md
@@ -59,6 +59,7 @@ The functional block diagram is shown below:
 | [Jingcai](./docs/board/board_jingcai.md) | ESP32-4848S040C_I_Y_3 |
 | [Waveshare](./docs/board/board_waveshare.md) | ESP32-S3-Touch-LCD-1.85, ESP32-S3-Touch-LCD-2.1, ESP32-S3-Touch-LCD-2.8C, ESP32-S3-Touch-LCD-4.3, ESP32-S3-Touch-LCD-4.3B, ESP32-S3-Touch-LCD-5, ESP32-S3-Touch-LCD-5B, ESP32-S3-Touch-LCD-7, ESP32-P4-NANO |
 | [VIEWE](./docs/board/board_viewe.md) | UEDX24320024E-WB-A, UEDX24320028E-WB-A, UEDX24320035E-WB-A, UEDX32480035E-WB-A, UEDX48270043E-WB-A, UEDX48480040E-WB-A, UEDX80480043E-WB-A, UEDX80480050E-WB-A, UEDX80480070E-WB-A |
+| Wireless-Tag | WTP4C5MP07S |
 
 📌 Click on the manufacturer name for detailed information.
 

diff --git a/esp_panel_board_supported_conf.h b/esp_panel_board_supported_conf.h
@@ -164,6 +164,13 @@
 // #define BOARD_VIEWE_UEDX80480050E_WB_A_2
 // #define BOARD_VIEWE_UEDX80480070E_WB_A
 
+/*
+ * Wireless-Tag (https://www.wireless-tag.com/):
+ *
+ *  -BOARD_WIRELESSTAG_WTP4C5MP07S (WTP4C5MP07S): https://shop.wireless-tag.com/products/7inch-lcd-touch-screen-1024x600-mipi-smart-displays-wtp4c5mp07s-esp32-lcd-board-used-with-esp32-p4-and-esp32-c5-dev-board
+ */
+// #define BOARD_WIRELESSTAG_WTP4C5MP07S
+
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 /////////////////////////////////////////////// File Version ///////////////////////////////////////////////////////////
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

diff --git a/examples/arduino/board/board_static_config/esp_panel_board_supported_conf.h b/examples/arduino/board/board_static_config/esp_panel_board_supported_conf.h
@@ -164,6 +164,13 @@
 // #define BOARD_VIEWE_UEDX80480050E_WB_A_2
 // #define BOARD_VIEWE_UEDX80480070E_WB_A
 
+/*
+ * Wireless-Tag (https://www.wireless-tag.com/):
+ *
+ *  -BOARD_WIRELESSTAG_WTP4C5MP07S (WTP4C5MP07S): https://shop.wireless-tag.com/products/7inch-lcd-touch-screen-1024x600-mipi-smart-displays-wtp4c5mp07s-esp32-lcd-board-used-with-esp32-p4-and-esp32-c5-dev-board
+ */
+// #define BOARD_WIRELESSTAG_WTP4C5MP07S
+
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 /////////////////////////////////////////////// File Version ///////////////////////////////////////////////////////////
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

diff --git a/src/board/supported/Kconfig.board_supported b/src/board/supported/Kconfig.board_supported
@@ -36,6 +36,11 @@ choice
         bool "VIEWE"
         help
             https://viewedisplay.com/
+
+    config ESP_PANEL_BOARD_MANUFACTURER_WIRELESSTAG
+        bool "Wireless-Tag"
+        help
+            https://www.wireless-tag.com/
 endchoice
 
 choice
@@ -64,4 +69,8 @@ choice
     if ESP_PANEL_BOARD_MANUFACTURER_VIEWE || ESP_PANEL_BOARD_MANUFACTURER_ALL
         orsource "./viewe/Kconfig.viewe"
     endif
+
+    if ESP_PANEL_BOARD_MANUFACTURER_WIRELESSTAG || ESP_PANEL_BOARD_MANUFACTURER_ALL
+        orsource "./wirelesstag/Kconfig.wirelesstag"
+    endif
 endchoice
diff --git a/src/board/supported/esp_panel_board_config_supported.h b/src/board/supported/esp_panel_board_config_supported.h
@@ -120,6 +120,8 @@
         + defined(BOARD_VIEWE_UEDX80480050E_WB_A_2) \
         + defined(BOARD_VIEWE_UEDX80480050E_AC_A) \
         + defined(BOARD_VIEWE_UEDX80480070E_WB_A) \
+        /* Wireless-Tag */ \
+        + defined(BOARD_WIRELESSTAG_WTP4C5MP07S) \
         > 1
         #error "Multiple boards enabled! Please check file `esp_panel_board_supported_conf.h` and make sure only one board is enabled."
     #endif
@@ -225,6 +227,9 @@
         #include "viewe/BOARD_VIEWE_UEDX80480050E_AC_A.h"
     #elif defined(BOARD_VIEWE_UEDX80480070E_WB_A)
         #include "viewe/BOARD_VIEWE_UEDX80480070E_WB_A.h"
+    /* Wireless-Tag */
+    #elif defined(BOARD_WIRELESSTAG_WTP4C5MP07S)
+        #include "wirelesstag/BOARD_WIRELESSTAG_WTP4C5MP07S.h"
     #else
         #error "Unknown board selected!"
     #endif

diff --git a/src/board/supported/esp_panel_board_kconfig_supported.h b/src/board/supported/esp_panel_board_kconfig_supported.h
@@ -273,4 +273,11 @@
     #endif
 #endif
 
+// Wireless-Tag
+#ifndef BOARD_WIRELESSTAG_WTP4C5MP07S
+    #ifdef CONFIG_BOARD_WIRELESSTAG_WTP4C5MP07S
+        #define BOARD_WIRELESSTAG_WTP4C5MP07S CONFIG_BOARD_WIRELESSTAG_WTP4C5MP07S
+    #endif
+#endif
+
 // *INDENT-ON*
diff --git a/src/board/supported/wirelesstag/BOARD_WIRELESSTAG_WTP4C5MP07S.h b/src/board/supported/wirelesstag/BOARD_WIRELESSTAG_WTP4C5MP07S.h
@@ -0,0 +1,284 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2025 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/**
+ * @file   BOARD_WIRELESSTAG_WTP4C5MP07S.h
+ * @brief  Configuration file for Wireless-Tag WTP4C5MP07S
+ * @author @lyusupov
+ * @link   https://shop.wireless-tag.com/products/7inch-lcd-touch-screen-1024x600-mipi-smart-displays-wtp4c5mp07s-esp32-lcd-board-used-with-esp32-p4-and-esp32-c5-dev-board
+ */
+
+#pragma once
+
+// *INDENT-OFF*
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//////////////////////////// Please update the following macros to configure general panel /////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * @brief Board name
+ */
+#define ESP_PANEL_BOARD_NAME                "Wireless-Tag:WTP4C5MP07S"
+
+/**
+ * @brief Panel resolution configuration in pixels
+ */
+#define ESP_PANEL_BOARD_WIDTH               (1024)  // Panel width (horizontal, in pixels)
+#define ESP_PANEL_BOARD_HEIGHT              (600)   // Panel height (vertical, in pixels)
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//////////////////////////// Please update the following macros to configure the LCD panel /////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * @brief LCD panel configuration flag (0/1)
+ *
+ * Set to `1` to enable LCD panel support, `0` to disable
+ */
+#define ESP_PANEL_BOARD_USE_LCD             (1)
+
+#if ESP_PANEL_BOARD_USE_LCD
+/**
+ * @brief LCD controller selection
+ */
+#define ESP_PANEL_BOARD_LCD_CONTROLLER      EK79007
+
+/**
+ * @brief LCD bus type selection
+ */
+#define ESP_PANEL_BOARD_LCD_BUS_TYPE        (ESP_PANEL_BUS_TYPE_MIPI_DSI)
+
+/**
+ * @brief LCD bus parameters configuration
+ *
+ * Configure parameters based on the selected bus type. Parameters for other bus types will be ignored.
+ * For detailed parameter explanations, see:
+ * https://docs.espressif.com/projects/esp-idf/en/v5.3.1/esp32s3/api-reference/peripherals/lcd/index.html
+ * https://docs.espressif.com/projects/esp-iot-solution/en/latest/display/lcd/index.html
+ */
+#if ESP_PANEL_BOARD_LCD_BUS_TYPE == ESP_PANEL_BUS_TYPE_MIPI_DSI
+
+    /**
+     * @brief MIPI DSI bus
+     */
+    /* For host */
+    #define ESP_PANEL_BOARD_LCD_MIPI_DSI_LANE_NUM           (2)     // ESP32-P4 supports 1 or 2 lanes
+    #define ESP_PANEL_BOARD_LCD_MIPI_DSI_LANE_RATE_MBPS     (1000)  // Single lane bit rate, should check the LCD drive IC
+                                                                    // datasheet for the supported lane rate. Different
+                                                                    // color format (RGB565/RGB888) may have different
+                                                                    // lane bit rate requirements.
+                                                                    // ESP32-P4 supports max 1500Mbps
+    /* For refresh panel (DPI) */
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_CLK_MHZ            (52)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_PIXEL_BITS         (ESP_PANEL_LCD_COLOR_BITS_RGB565)
+                                                                    // ESP_PANEL_LCD_COLOR_BITS_RGB565/RGB666/RGB888
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_HPW                (10)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_HBP                (160)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_HFP                (160)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_VPW                (1)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_VBP                (23)
+    #define ESP_PANEL_BOARD_LCD_MIPI_DPI_VFP                (12)
+    /* For DSI power PHY */
+    #define ESP_PANEL_BOARD_LCD_MIPI_PHY_LDO_ID             (3)     // -1 if not used.
+
+#endif // ESP_PANEL_BOARD_LCD_BUS_TYPE
+
+/**
+ * @brief LCD vendor initialization commands
+ *
+ * Vendor specific initialization can be different between manufacturers, should consult the LCD supplier for
+ * initialization sequence code. Please uncomment and change the following macro definitions. Otherwise, the LCD driver
+ * will use the default initialization sequence code.
+ *
+ * The initialization sequence can be specified in two formats:
+ * 1. Raw format:
+ *    {command, (uint8_t []){data0, data1, ...}, data_size, delay_ms}
+ * 2. Helper macros:
+ *    - ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(delay_ms, command, {data0, data1, ...})
+ *    - ESP_PANEL_LCD_CMD_WITH_NONE_PARAM(delay_ms, command)
+ */
+/*
+#define ESP_PANEL_BOARD_LCD_VENDOR_INIT_CMD()                       \
+    {                                                               \
+        {0xFF, (uint8_t []){0x77, 0x01, 0x00, 0x00, 0x10}, 5, 0},   \
+        {0xC0, (uint8_t []){0x3B, 0x00}, 2, 0},                     \
+        {0xC1, (uint8_t []){0x0D, 0x02}, 2, 0},                     \
+        {0x29, (uint8_t []){0x00}, 0, 120},                         \
+        or
+        ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xFF, {0x77, 0x01, 0x00, 0x00, 0x10}), \
+        ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xC0, {0x3B, 0x00}),                   \
+        ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xC1, {0x0D, 0x02}),                   \
+        ESP_PANEL_LCD_CMD_WITH_NONE_PARAM(120, 0x29),                               \
+    }
+*/
+
+/**
+ * @brief LCD color configuration
+ */
+#define ESP_PANEL_BOARD_LCD_COLOR_BITS          (ESP_PANEL_LCD_COLOR_BITS_RGB565)
+                                                        // ESP_PANEL_LCD_COLOR_BITS_RGB565/RGB666/RGB888
+#define ESP_PANEL_BOARD_LCD_COLOR_BGR_ORDER     (0)     // 0: RGB, 1: BGR
+#define ESP_PANEL_BOARD_LCD_COLOR_INEVRT_BIT    (0)     // 0/1
+
+/**
+ * @brief LCD transformation configuration
+ */
+#define ESP_PANEL_BOARD_LCD_SWAP_XY             (0)     // 0/1
+#define ESP_PANEL_BOARD_LCD_MIRROR_X            (0)     // 0/1
+#define ESP_PANEL_BOARD_LCD_MIRROR_Y            (0)     // 0/1
+#define ESP_PANEL_BOARD_LCD_GAP_X               (0)     // [0, ESP_PANEL_BOARD_WIDTH]
+#define ESP_PANEL_BOARD_LCD_GAP_Y               (0)     // [0, ESP_PANEL_BOARD_HEIGHT]
+
+/**
+ * @brief LCD reset pin configuration
+ */
+#define ESP_PANEL_BOARD_LCD_RST_IO              (23)    // Reset pin, -1 if not used
+#define ESP_PANEL_BOARD_LCD_RST_LEVEL           (1)     // Reset active level, 0: low, 1: high
+
+#endif // ESP_PANEL_BOARD_USE_LCD
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//////////////////////////// Please update the following macros to configure the touch panel ///////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * @brief Touch panel configuration flag (0/1)
+ *
+ * Set to `1` to enable touch panel support, `0` to disable
+ */
+#define ESP_PANEL_BOARD_USE_TOUCH               (1)
+
+#if ESP_PANEL_BOARD_USE_TOUCH
+/**
+ * @brief Touch controller selection
+ */
+#define ESP_PANEL_BOARD_TOUCH_CONTROLLER        GT911
+
+/**
+ * @brief Touch bus type selection
+ */
+#define ESP_PANEL_BOARD_TOUCH_BUS_TYPE          (ESP_PANEL_BUS_TYPE_I2C)
+
+#if (ESP_PANEL_BOARD_TOUCH_BUS_TYPE == ESP_PANEL_BUS_TYPE_I2C) || \
+    (ESP_PANEL_BOARD_TOUCH_BUS_TYPE == ESP_PANEL_BUS_TYPE_SPI)
+/**
+ * If set to 1, the bus will skip to initialize the corresponding host. Users need to initialize the host in advance.
+ *
+ * For drivers which created by this library, even if they use the same host, the host will be initialized only once.
+ * So it is not necessary to set the macro to `1`. For other drivers (like `Wire`), please set the macro to `1`
+ * ensure that the host is initialized only once.
+ */
+#define ESP_PANEL_BOARD_TOUCH_BUS_SKIP_INIT_HOST        (0)     // 0/1. Typically set to 0
+#endif
+
+/**
+ * @brief Touch bus parameters configuration
+ */
+#if ESP_PANEL_BOARD_TOUCH_BUS_TYPE == ESP_PANEL_BUS_TYPE_I2C
+
+    /**
+     * @brief I2C bus
+     */
+    /* For general */
+    #define ESP_PANEL_BOARD_TOUCH_I2C_HOST_ID           (0)     // Typically set to 0
+#if !ESP_PANEL_BOARD_TOUCH_BUS_SKIP_INIT_HOST
+    /* For host */
+    #define ESP_PANEL_BOARD_TOUCH_I2C_CLK_HZ            (400 * 1000)
+                                                                // Typically set to 400K
+    #define ESP_PANEL_BOARD_TOUCH_I2C_SCL_PULLUP        (0)     // 0/1. Typically set to 1
+    #define ESP_PANEL_BOARD_TOUCH_I2C_SDA_PULLUP        (0)     // 0/1. Typically set to 1
+    #define ESP_PANEL_BOARD_TOUCH_I2C_IO_SCL            (8)
+    #define ESP_PANEL_BOARD_TOUCH_I2C_IO_SDA            (7)
+#endif
+    /* For panel */
+    #define ESP_PANEL_BOARD_TOUCH_I2C_ADDRESS           (0)     // Typically set to 0 to use the default address.
+                                                                // - For touchs with only one address, set to 0
+                                                                // - For touchs with multiple addresses, set to 0 or
+                                                                //   the address. Like GT911, there are two addresses:
+                                                                //   0x5D(default) and 0x14
+
+#endif // ESP_PANEL_BOARD_TOUCH_BUS_TYPE
+
+/**
+ * @brief Touch panel transformation flags
+ */
+#define ESP_PANEL_BOARD_TOUCH_SWAP_XY           (0)     // 0/1
+#define ESP_PANEL_BOARD_TOUCH_MIRROR_X          (1)     // 0/1
+#define ESP_PANEL_BOARD_TOUCH_MIRROR_Y          (1)     // 0/1
+
+/**
+ * @brief Touch panel control pins
+ */
+#define ESP_PANEL_BOARD_TOUCH_RST_IO            (-1)    // Reset pin, -1 if not used
+#define ESP_PANEL_BOARD_TOUCH_RST_LEVEL         (1)     // Reset active level, 0: low, 1: high
+#define ESP_PANEL_BOARD_TOUCH_INT_IO            (21)    // Interrupt pin, -1 if not used
+#define ESP_PANEL_BOARD_TOUCH_INT_LEVEL         (0)     // Interrupt active level, 0: low, 1: high
+
+#endif // ESP_PANEL_BOARD_USE_TOUCH
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////// Please update the following macros to configure the backlight ////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * @brief Backlight configuration flag (0/1)
+ *
+ * Set to `1` to enable backlight support, `0` to disable
+ */
+#define ESP_PANEL_BOARD_USE_BACKLIGHT           (1)
+
+#if ESP_PANEL_BOARD_USE_BACKLIGHT
+/**
+ * @brief Backlight control type selection
+ */
+#define ESP_PANEL_BOARD_BACKLIGHT_TYPE          (ESP_PANEL_BACKLIGHT_TYPE_SWITCH_GPIO)
+
+#if (ESP_PANEL_BOARD_BACKLIGHT_TYPE == ESP_PANEL_BACKLIGHT_TYPE_SWITCH_GPIO) || \
+    (ESP_PANEL_BOARD_BACKLIGHT_TYPE == ESP_PANEL_BACKLIGHT_TYPE_SWITCH_EXPANDER) || \
+    (ESP_PANEL_BOARD_BACKLIGHT_TYPE == ESP_PANEL_BACKLIGHT_TYPE_PWM_LEDC)
+
+    /**
+     * @brief Backlight control pin configuration
+     */
+    #define ESP_PANEL_BOARD_BACKLIGHT_IO        (20)    // Output GPIO pin number
+    #define ESP_PANEL_BOARD_BACKLIGHT_ON_LEVEL  (1)     // Active level, 0: low, 1: high
+
+#endif // ESP_PANEL_BOARD_BACKLIGHT_TYPE
+
+/**
+ * @brief Backlight idle state configuration (0/1)
+ *
+ * Set to 1 if want to turn off the backlight after initializing. Otherwise, the backlight will be on.
+ */
+#define ESP_PANEL_BOARD_BACKLIGHT_IDLE_OFF      (0)
+
+#endif // ESP_PANEL_BOARD_USE_BACKLIGHT
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////// Please update the following macros to configure the IO expander //////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * @brief IO expander configuration flag (0/1)
+ *
+ * Set to `1` to enable IO expander support, `0` to disable
+ */
+#define ESP_PANEL_BOARD_USE_EXPANDER            (0)
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/////////////////////// Please utilize the following macros to execute any additional code if required /////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////// File Version ///////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/**
+ * Do not change the following versions. These version numbers are used to check compatibility between this
+ * configuration file and the library. Rules for version numbers:
+ * 1. Major version mismatch: Configurations are incompatible, must use library version
+ * 2. Minor version mismatch: May be missing new configurations, recommended to update
+ * 3. Patch version mismatch: No impact on functionality
+ */
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 1
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+
+// *INDENT-ON*
diff --git a/src/board/supported/wirelesstag/Kconfig.wirelesstag b/src/board/supported/wirelesstag/Kconfig.wirelesstag
@@ -0,0 +1,4 @@
+config BOARD_WIRELESSTAG_WTP4C5MP07S
+    bool "Wireless-Tag WTP4C5MP07S (with 7-inch 1024x600 LCD)"
+    help
+        https://shop.wireless-tag.com/products/7inch-lcd-touch-screen-1024x600-mipi-smart-displays-wtp4c5mp07s-esp32-lcd-board-used-with-esp32-p4-and-esp32-c5-dev-board